Standard Operating Procedure For Cleaning And Sanitation Of General Area Of Production Block

by Pharmadocx Consultants

PURPOSETo lay down the procedure for the cleaning and sanitation of general areas

of production block including service area, passages, change rooms, offices and storage

areas.

SCOPEThis procedure applies for the entire Production Area.

 RESPONSIBILITY :  The House Keeper.

                                    The Production Officer.         

PROCEDURE:   

Daily Schedule:

1. Pick up the trash materials from floors.

2. Empty waste bins and reline with plastic bags when necessary.

3.Wash sink and waste pipe using 0.1% teepol solution in water and wipe dry.

4.Wash interior surface of commode bowl using bowl cleaner solution with a bowl mop.  Wash exterior surface of bowl seat using 0.1% teepol solution in water.

5.Damp mop all accessible area suing lint free or rubber lined handle mops initially with a 0.1% teepol solution in water, then with plain water and finally with a disinfectant solution.

Author: (GM Production)Checked by: (QA Manager)Authorised by: (Director Technical)
Date:Date :Date :

(Review date on or before 12 months from date of authorization)

Written by Anmol Singh

Anmol Singh Completed his Bachelors in Field of Mechanical and Automation Engineering. He has over 2 Years of experience in field of Pharmaceuticals, Medical Devices, Cosmetics Manufacturing.

13 June 2023

You May Also Like…

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

You cannot copy content of this page

Open chat
Contact Us!
Chat with Us on WhatsApp! We reply within 5 minutes!