PURPOSE: To lay down procedure for cleaning of storage tank for Injection.
RESPONSIBILITY : Production Manager
INTRODUCTION:- As the name itself indicates the tank is used to store water for injection I.P. Tank is kept in sterile area & the water stored in it, is used for batch manufacturing purposes. Capacity of tank is 325 lts. Tank has been provided with the water inlet, water outlet, drainage pipe & a lid to cover & clean the tank.
REQUIREMENTS:-
1. Scrubbing brush
2. 0.2 % teepol soln.
3. Bucket & Mug
4. Lint free cloth.
PROCEDURE:-
1 Remove all water for inj. I.P. from the tanks. Close water Drainage valve.
2 Scrub the tank from inside with brush & 0.2 % teepol soln.
3 Rinse the tank thrice with water followed by twice each with Purified water & Water For Injection each.
4 The tank is ready for use. Close the drain valve & cover the lid.
| Author: (Production Manager) | Checked by: (QA Manager) | Authorized by: (Director Administration) |
| Date: | Date : | Date : |
(Review date on or before 12 months from date of authorization)
0 Comments