by Pharmadocx Consultants
PROCEDURE :- 1. Wet all surfaces of toilet seat, urine pot & floor with water.
2. Put Harpic soln. on all ceramic surfaces & soap soln. on floor.
3. Scrub with a brush to remove deposit.
4. Flush with plenty of water
5. Put naphthalene balls in the wash basin & urine pots.
REF. DOCUMENT – LOG BOOK (F/PRD/29)
SCOPE: This procedure of this SOP shall be applicable for Maintenance Department. RESPONSIBILITY : Operator...
PURPOSE: In order to prevent viable and non viable particle shedding, as well as to keep the levels of both...
1st Change Room Remove the factory attire and them neatly in the almirah provided in the 1st change Rinse your...
You cannot copy content of this page
0 Comments