SCOPE: This procedure of this SOP shall be applicable for Maintenance Department. RESPONSIBILITY : Operator PROCEDURE: 1. Start the D.M water line and check the conductivity of the D.M water to be fed to the distillation Plant. 2. Fill the...
PURPOSE: In order to prevent viable and non viable particle shedding, as well as to keep the levels of both viable and non viable particles low, it is absolutely necessary to wear dedicated garments while working in the sterile filling area. These garments are...
1st Change Room Remove the factory attire and them neatly in the almirah provided in the 1st change Rinse your hands with the sterile antiseptic solution (i.e savlon) in use as per cycle in basin provided for the purpose. Open the door of the 2nd...
PROCEDURE:- GOWNING PROCEDURE 3 nd AIR LOCK Step into 3rd half the 3rd change room by pushing the door with your elbow . Open the door leading to filling room. Enter into the corridor. Author: (Production Manager )Checked by: (QA...
PROCEDURE:- GOWNING PROCEDURE 2nd Air Lock. 1. Select a pair of sterilized gloves and check indicator and sterilization/expiry date. Slowly slip in the left hand gloves and then the right hand glove and spray sterile 70 % Isopropyl Alcohol on gloved hands....
PURPOSE: To lay down a procedure for the maintenance in case of dehumidifier. RESPONSIBILITY : 1. Section Supervisor/Shift In-charge 2. Maintenance Engineer PROCEDURE:...
